how are an fittings measured ?

Description

how are an fittings measured ?

Liens utiles:

https://www.jegs.com/tech-articles/how-to-assemble-an-fittings-and-hose-assemblies

https://www.jegs.com/tech-articles/how-to-assemble-an-fittings-and-hose-assemblies
AN Fitting Size Chart: A Guide To Assembling Fittings & Hoses | JEGS
15 juin 2023AN fittings are designed for a variety of thread sizes, typically ranging from -4 to -24 in irregular steps. We must remember that AN fittings use a standard 37-degree flare for their sealing surface. Hence, you cannot couple an AN fitting to a different flare-type fitting, as it will result in leaks.

https://www.speedingparts.com/i/guides-and-information/an-fittings-and-hose/an-fittings-measurement-a-guide-to-the-right-size.html

https://www.speedingparts.com/i/guides-and-information/an-fittings-and-hose/an-fittings-measurement-a-guide-to-the-right-size.html
AN-fittings measurement – A guide to the right size
Dimensions of AN fittings, hose and pipes are some of the most common questions and misconceptions that exist about the AN system. AN is measured in inches where AN1 in theory is 1/16, AN8 is then 1/2 and AN16 is thus 1.

https://www.dragstuff.com / techarticles / AN-Reference-Chart.html

https://www.dragstuff.com / techarticles / AN-Reference-Chart.html
AN Fitting and Hose Size Reference Charts – Dragstuff
AN Fittings – Hose and Tubing Size Reference Charts. by John Heard, Last Updated Dec 31, 2014. Stainless Tubing AN Equivalent All dimensions are in inches unless otherwise noted. AN: Tube Size OD Thread Size Wrench Size-2: 1/8 5/16-24: N/A-3: 3/16 3/8-24: 1/2-4: 1/4 7/16-20: 9/16-5: 5/16 1/2-20: N/A-6: 3/8 9/16-18: 11/16-8:

https://www.cpperformance.com/t-an-fittings-guide.aspx

https://www.cpperformance.com/t-an-fittings-guide.aspx
An Fitting Size Guide – CP Performance
You can always identify AN fittings based on the male thread size (outside diameter). These sizes are constant regardless of brand, hose type, or fitting configuration. If your fitting has a convex 37 degree flare at the end, the threads will tell you the AN size (and vice-versa).

https://www.onallcylinders.com/2013/06/06/quick-tech-an-vs-npt-fittings-and-how-they-relate

https://www.onallcylinders.com/2013/06/06/quick-tech-an-vs-npt-fittings-and-how-they-relate
AN vs. NPT Fittings and How They Relate – OnAllCylinders
The nominal outside diameter of the tubing is expressed in sixteenths of an inch increments and then given an equivalent dash number. For example, an -8 AN fitting translates to an 8/16 inches, or 1/2-inch. You can convert any AN fitting to its nominal inch size by dividing the AN number by 16 as follows: -4 AN = 4/16″ or 1/4″.

https://blog.lightingandsupplies.com/what-are-an-fittings-an-fitting-sizes-explained

https://blog.lightingandsupplies.com/what-are-an-fittings-an-fitting-sizes-explained
What are AN Fittings? AN Fitting Sizes Explained – Lighting and Supplies
7 janv. 2023The size of an AN fitting is indicated by two numbers separated by a dash, such as AN6 or AN8. The first number refers to the size of the fitting, while the second number refers to the thread size. For example, an AN6″ fitting has a nominal size of 6/16″ and a thread size of 3/8-24.

https://www.pegasusautoracing.com/document.asp?DocID=TECH00096

https://www.pegasusautoracing.com/document.asp?DocID=TECH00096
AN Fittings & Hose Sizes – Pegasus – Pegasus Auto Racing
Background The idea behind AN hoses and AN fittings was to provide a flexible alternative to rigid tubing in plumbing systems on aircraft and military vehicles. Sizes for rigid tubes were already standardized, with sizes called out by tubing OD (3/16, 1/2, etc). AN hose sizes were designed to match the ID sizes of these rigid tubes.

https://www.jegs.com/tech-articles/an-fittings-and-hose-sizes-and-what-they-mean-for-your-ride

https://www.jegs.com/tech-articles/an-fittings-and-hose-sizes-and-what-they-mean-for-your-ride
AN Fittings and Hose Sizes and What They Mean for Your Ride
22 nov. 2023AN Hose Types and Fitting Adaptors. Not only that AN hoses come in various sizes, but they also differ in their type. Based on the specific application, the hoses can have the inner lining made of either rubber or Polytetrafluorethylene (PTFE), also known as Teflon.On the outside, the hose can have either a smooth covering from rubber or a steel braided mesh for improved durability.

https://www.youtube.com/watch?v=IgA_N2ZmTXw

https://www.youtube.com/watch?v=IgA_N2ZmTXw
AN Fittings & Hoses Guide & How To – YouTube
We talk AN fittings and hoses. The different types, the different sizes and where you would use the on the car. We provide an overview of fittings, adapters …

https://help.summitracing.com/app/answers/detail/a_id/273/~/what-is-an-an-fitting?

https://help.summitracing.com/app/answers/detail/a_id/273/~/what-is-an-an-fitting?
What is an AN fitting? – Summit Racing
Plumbing Basics – AN Fittings & Hoses. AN stands for Army-Navy. The size specifications were established by the military back in World War II. They were originally used in the aerospace industry. AN fittings use a 37 degree flare as the sealing surface. DO NOT use AN fittings with different flare-type .
lesoutrali bot