how can you tell if revere ware is pre 1968 ?

Description

how can you tell if revere ware is pre 1968 ?

Here are some links that might be useful to you:

https://www.reverewareparts.com/information-product-manuals/identifying-vintage-revere-ware

https://www.reverewareparts.com/information-product-manuals/identifying-vintage-revere-ware
Identifying Vintage Revere Ware – Revere Ware Parts
Vintage Revere Ware was made during the golden era of Revere Ware that saw cookware with thicker copper and stainless steel layers, and general better quality. This ended in 1968 as Revere Ware moved to cheaper construction. You can see the difference in thickness between the vintage era cookware and later cookware in this image.
Sauce Pans – 1-Screw Style
Material: Bakelite, stainless steel, aluminum Includes: One handle + hardware set Measurements: 5.1 in (130 mm) long overall, 4.3 in (110 mm) long Bakelite Fits: Newer style 1 1/2 quart and 2 quart sauce pans and handled steamer baskets, 7-inch and 7 1/4 inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others (definition of skillet, pan, etc. here).
Knobs
Material: Bakelite, brass Includes: Bakelite knob with brass screw insert. A separate screw is NOT included as all Revere lids have a screw attached to them. Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob. Continue …
Pots & Dutch Ovens
Material: Bakelite, stainless steel Includes: Two handle halves + two screws. Each order includes two handles, enough for one pot. Measurements: Approximately 3.0 in (75.5 mm) x 1.25 (32 mm) x 1.5 in in (38 mm) Fits: Newer era pots and Dutch ovens that use a single screw that screws directly into the side of the pot.If your pot handles look like these, they should fit.
Tea Kettles
Fits: 2 1/3 quart Revere Ware tea kettles originally made under the following model numbers: 2701, 2901, 2722, and 2712. Details $ 11.99 Add to cart. Find Parts. By Cookware Type. Skillets 1-Screw Style; Skillets 2-Screw Style. 6-in; 7-in; 8-in, 9-in Square; 10-12 in, 10-in Square; Pots & Dutch Ovens;
Skillets 2-Screw Style
The recommendations for handle size based on the measurements of your skillet are suggestions only. To insure a proper fit, please check the the stated measurements for our parts against your existing handle. Specifically, check the measurements of the Bakelite part of the handle, the distance between the centers of the holes, and the size of the metal spline the handle goes on to insure a …
Contact Us
You can also read about why we don’t have a customer service phone number and how to get our mailing address. You can also email us directly, such as if you want to send us pictures. (The image of our email address below is intentionally blurred slightly to make it harder for automatic harvesting of email addresses for SPAM purposes …

https://www.33rdsquare.com/how-to-tell-the-age-of-revere-ware

https://www.33rdsquare.com/how-to-tell-the-age-of-revere-ware
How to Tell the Age of Revere Ware – 33rd Square
19 oct. 2023Examine the Bottom for Markings. The most foolproof way to identify the age of your Revere Ware pan or pot is to look at any markings stamped on the bottom. This marking, known as the style number, can pinpoint the year or even decade your cookware was manufactured. Here is an overview of what the style number can indicate: Numbers under …

https://www.mybubbaandme.com / other / how-can-you-tell-revere-ware-is-pre-1968

https://www.mybubbaandme.com / other / how-can-you-tell-revere-ware-is-pre-1968
How can you tell Revere Ware is pre 1968? – My bubba and me
The earliest Revere Ware, produced between 1939 and 1947 used the older style handle with two screws close together at the front of the handle. Here you can see these alongside the newer handles used from 1947 until 1968 that had the two screws on opposite ends of the handles.

https://justalittlebite.com/how-can-you-tell-if-revere-ware-is-vintage

https://justalittlebite.com/how-can-you-tell-if-revere-ware-is-vintage
How can you tell if Revere Ware is vintage? – JustALittleBite
9 févr. 2022The company discontinued production of the product in 1968, but it has since become a highly sought-after collectible item. To tell if your Revere Ware is vintage, you will need to examine the bottom of the pan. If there are two numbers stamped on either side of the bottom, then it’s an older piece. Identifying from the Past.

https://en.wikipedia.org/wiki/Revere_Ware

https://en.wikipedia.org/wiki/Revere_Ware
Revere Ware – Wikipedia
Revere Ware. Vintage Revere Ware, manufactured before 1968 and carrying the prized Process Patent maker’s mark on the thick copper bottom, is finding its way back into modern kitchens. (Photo courtesy of Blane van Pletzen-Rands) Revere Ware is a line of consumer and commercial kitchen wares introduced in 1939 by the Brass & Copper Corp.

https://reverewarecookware.org/vintage-revere-ware-pots-and-pans

https://reverewarecookware.org/vintage-revere-ware-pots-and-pans
Vintage Revere Ware Pots and Pans | Revere Ware Cookware
5. Last but not least, you can always check your local classifieds! These are all viable avenues of purchase when acquiring vintage Revere Ware, and you may be surprised to find out it’s shockingly affordable. In my research, I came across individual pans anywhere from $10 to around $40, and full sets around $250-$300.

https://www.reverewareparts.com/vintage-and-process-patent

https://www.reverewareparts.com/vintage-and-process-patent
Vintage & Process Patent – Revere Ware Parts
The older, Vintage Revere Ware (before 1968) was made using an electroplating process that resulted in a thick, heavy layer of cladding giving it the legendary Revere Ware cooking qualities. Starting in 1968, Revere economized their manufacturing process, and reduced the thickness of the copper cladding by almost 50%. Invisible to …

https://paulrevereware.wordpress.com/2012/10/12/revere-ware-from-1968-to-1977

https://paulrevereware.wordpress.com/2012/10/12/revere-ware-from-1968-to-1977
Revere Ware From 1968 to 1977 | Revere Ware USA
The picture in this post of the Rome logo was from a pan manufactured in 1979. This stamp without a date with the Clinton stamp could have been produced from 1968 to 1977. Any cookware with Riverside printed on the bottom will be Process Patent, and is actually fairly rare. You won’t see this logo with Riverside on it.

https://kitchensnippet.com/do-they-still-make-revere-ware-cookware

https://kitchensnippet.com/do-they-still-make-revere-ware-cookware
Do They Still Make Revere Ware Cookware? Uncover the Truth!
22 nov. 2023Here’s how you can identify whether a piece of Revere Ware is indeed a slice of cooking history or part of the more recent line: Vintage Revere Ware: Typically created before the 1968 company sale, these pieces have a thicker copper layer and display exquisite craftsmanship. Notably, they often feature the Process Patent or Pat. Pend …

https://www.reverewareparts.com/help-identifying-some-revere-ware-cookware

https://www.reverewareparts.com/help-identifying-some-revere-ware-cookware
Help identifying some Revere Ware cookware
Customer Zach is curious what line his Revere Ware might be part of, see pictures below. Zach writes: Hello! I just picked up a beautiful RW 3qt copper-bottom saucepan and a matching 10″ skillet (with vertical sidewalls) at Goodwill. I love them, but am having trouble determining the line with which they were produced.
lesoutrali bot